apollo
A revolutionary pick & place handler

Quad handler with superior energy efficiency, ultimate temperature performance, unmatched reliability, effortless operation, and seamless transitions to cutting-edge products.

• Ultimate thermal performance & accuracy
• high volume /multisite engineering
• low & medium volume production
• high volume production for test times >5s

Discover a new era of efficiency and precision with Apollo – the new game-changer in the semiconductor testing.

• Productivity: Up to 2,800 UPH @ 4s test time
• Flexibility: Supports QFP, QFN, SO, SOT, BGA and more | Tool-less kit changeover < 5 minutes
• Thermal Performance: –80 °C to +225 °C, ±0.5 °C stability
• Ease of Use: 23.8” multi-touch panel, intuitive HMI

• High-volume & multisite engineering
• Low & medium volume production
• High-volume production > 5s test time (Apollo Super Soak)

System & Performance:

• Single, dual, or quad site contacting
• Index time (4 devices): 0.85s
• Reuse of existing loadboards, no fixed socket pitch

Thermal Performance:

• Min. plunger: –80 °C (LN2) / –70 °C (e-chiller)
• Max. plunger: +225 °C
• Stability: ±0.5 °C
• Heat-up: +21 °C to +175 °C in 3 min
• Cool-down: +21 °C to –50 °C in 13 min (LN2 system)

Device Compatibility:

• Packages: QFP, QFN, SO, SOT, BGA and more
• Size range: 2.5 × 2.5 × 0.5 mm up to 125 × 120 × 10 mm
• Tool-less kit changeover < 5 minutes

Input / Output Options

• JEDEC tray, tube, tape, bowl, magazine
• Continuous load supported
• Bin configuration free, Pin1 orientation free

Interfaces

• RS232, TCP/IP, GPIB, TTL

Facility requirements:

• Power supply and connector:
  EU: 400V / 50-60Hz / 5A (3,5kVA / cosφ 0,8)
  EU + E-Chiller: 400V / 50Hz / 13A (8,5kVA / cosφ 0,8)
  Connector: CEE 16A 3Ph+N+PE (IEC 60309)
  RCD requirement: Type B (B+)
  
  US: 208V / 50-60Hz / 9,7A (3,5kVA / cosφ 0,8)
  US + E-Chiller: 208V / 60Hz / 23A (8,5kVA / cosφ 0,8)
  Connector: default: NEMA L21-30P (other types available)
• pneumatic:
  1⁄4 Inch NPT Male threaded quick connect fitting supplied by customer (or alternative 1⁄4 Inch NPT male fitting)
  *Also need female fitting on supply line
  
  Minimum 6 bar (87 psi) / Maximum 14 bar (203 psi)
  Must be clean, dry, oil-free air (CDA)
  *Please ensure the dew point of the supply air is -60°C (-76°F) if cold testing will be performed or icing will occur.
  max. consumption 350 l / min (@ TriTemp operation)

Facility requirements II:

• Vacuum Supply:
  1⁄4 Inch NPT Female quick connect fitting supplied by customer (or alternative 1⁄4 Inch NPT female)
  *Also need male fitting on supply line
  Minimum vacuum 200 mbar / 2.9 psi (abs.)
  Not needed with onboard vacuum pump option
• LN2:
  3⁄8 Inch NPT Female LN2 supply connection (provided with LN2 option)
  1.5–4.0 bar / 21.8–58.0 psi
  *For pressures over 3.5 bar, a regulator is required
  Typical consumption rate (steady state) 3.0 l/h
  Peak consumption rate (cooldown phase) 8.0 l/h

• Superior energy efficiency
• Future-proof (AMR/AGV ready)
• High throughput → fast ROI
• Best-in-class thermal accuracy